BioFuel

Commercial Processors

The Precision Biodiesel Equipment Range

**The Precision Biodiesel Equipment Range is now offered by 70CentsaGallon.com. This system is completely assembled on a skid and will include all equipment to make high quality biodiesel.  The only additional equipment you need will be storage tanks for your Feedstock and Final Biodiesel.

Down Load Precision Info Doc #1

Down Load Precision Info Doc #2

BEE Precision 100

This system includes a Methoxide Mixer, Reactor, Ion Exchange Dry Wash and a proven Methanol Recovery system engineered by some of the top professionals in the industry.  ALL tanks, pumps, piping, valves are made from 304 Stainless Steel to ensure no erosion!

This system will be capable of making finished biodiesel in 8 hours. So within a normal workday you will be able to produce 380 Litres of finished biodiesel!

BEE Precision 100 Package

600 micron pre filter

Sodium Methylate electric feed diaphragm pump with explosion proof motor

Methanol feed/circulation centrifugal pump with explosion proof motor 20 LPM

Stainless steel 120 Litre sodium Methylate/methanol mix tank

Feedstock feed/circulation centrifugal pump with explosion proof motor 55 LPM

12 kW feedstock electric heater

Stainless Steel Reactor Vessel 560 Litres

Ion Tower feed/transfer pump 12 LPM

Stainless Steel Ion Exchange Resin Tower

Stainless Steel Methanol Recovery Batch Flash Evaporator 900 Litres

12 kW Electric Heater

Centrifugal circulation/transfer pump with explosion proof motor 150 L PM

Air Compressor

Air Fin Condenser

Air Ejector to produce vacuum

Stainless Steel Methanol Recovery Tank 80 Litres

Stainless Steel Plumbing

Stainless Steel valves and fittings

Skid mounted

Visual Indication gages

Control panel with Color Touch Screen

Completely wired, piped, and tested

Dimensions:

4ft W X 6ft L X 8ft H

Weight:

Approximately 900 Lbs. (empty).

Capacity:

380 Litres of oil

Construction:

All materials used in the construction of this system will be 304 Stainless Steel.

Piping:

Stainless Steel

Electrical:

220V/3PH/50Hz (ATEX)

Controls:

Automatic mode controlled by PLC and color touch screen;   Start button initiates automated process; Manual glycerin and fuel transfer modes require Human action.

Reaction Method:

Base Transesterification

Wash Method:

Dry Wash using Purolite PD206.  No Water Wash!

Batch Time:

Heating of material and Methoxide mixing 1.5 hr

Reaction Time - 1.5 hrs

Settling Time - 2 hrs

Dry Wash- 1 hr

Methanol Recovery 1hr

We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)

Total Process Time:

Approx. 8 hours start to finish.

Price:  CONTACT US!

BEE Precision 200

This system includes a Methoxide Mixer, Reactor, Ion Exchange Dry Wash and a proven Methanol Recovery system engineered by some of the top professionals in the industry.  ALL tanks, pumps, piping, valves are made from 304 Stainless Steel to ensure no corrosion!

This system will be capable of making finished biodiesel in 10 hours. So within a normal workday you will be able to produce 760 Litres of finished biodiesel!

BEE Precision 200 Package

600 micron pre filter

Sodium Methylate electric feed diaphragm pump with explosion proof motor

Methanol feed/circulation centrifugal pump with explosion proof motor 20 LPM

Stainless Steel 115 Litre Sodium Methylate/Methanol mix tank

Feedstock feed/circulation centrifugal pump with explosion proof motor 60LPM

12 kW feedstock electric heater

Two (2) Stainless Steel Reactor Vessel 150 gallons

Ion Tower feed/transfer pump 12LPM

Stainless Steel Ion Exchange Resin Tower

Stainless Steel Methanol Recovery Batch Flash Evaporator 900 Litres

12 kW Electric Heater

Centrifugal circulation/transfer pump with explosion proof motor 150 L PM

Air Compressor

Air Fin Condenser

Air Ejector to produce vacuum

Stainless Steel Methanol Recovery Tank 75 Litres

Stainless Steel Plumbing

Stainless Steel valves and fittings

Skid mounted

Visual Indication gauges

Control panel with Color Touch Screen

Completely wired, piped, and tested

Dimensions:

4ft W X 6ft L X 8ft H

Weight:

Approximately 450kg. (empty).

Capacity:

760 Litres of oil

Construction:

All materials used in the construction of this system will be 304 Stainless Steel.

Piping:

Stainless Steel

Electrical:

220V/3PH/50Hz (ATEX)

Controls:

Automatic mode controlled by PLC and color touch screen;   Start button initiates automated process; Manual glycerin and fuel transfer modes require Human action.

Reaction Method:

Base Transesterification

Wash Method:

Dry Wash using Purolite PD206. No Water Wash!

Batch Time:

Heating of material and Methoxide mixing 1.5 hr

Reaction Time - 1.5 hrs

Settling Time . 4 hrs (2 hrs each)

Dry Wash- 1 hr

Methanol Recovery 1hr

We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)

Total Process Time:

Approx. 10 hours start to finish.

Price:  Contact Us

Want More Pictures?  Contact Us and request more photos, we will send them to you directly.

BEE Precision 300

This system includes a Methoxide Mixer, Reactor, Ion Exchange Dry Wash and a proven Methanol Recovery system engineered by some of the top professionals in the industry.  ALL tanks, pumps, piping, valves are made from 304 Stainless Steel to ensure no erosion!

This system will be capable of making finished biodiesel in 8 hours. So within a normal workday you will be able to produce 1,135 gallons of finished biodiesel!

BEE Precision 300 Package

600 micron pre filter

Sodium Methylate electric feed diaphragm pump with explosion proof motor

Methanol feed/circulation centrifugal pump with explosion proof motor 40 LPM

Stainless steel 285 Litre sodium Methylate/methanol mix tank

Feedstock feed/circulation centrifugal pump with explosion proof motor 55 LPM

24 kW feedstock electric heater

Stainless Steel Reactor Vessel 1,515 Litres

Ion Tower feed/transfer pump 24 LP M

Two (2) Stainless Steel Ion Exchange Resin Tower

Stainless Steel Methanol Recovery Batch Flash Evaporator 1,820 Litres

24 kW Electric Heater

Centrifugal circulation/transfer pump with explosion proof motor 150 LPM

Air Compressor

Air Fin Condenser

Air Ejector to produce vacuum

Stainless Steel Methanol Recovery Tank 150 LPM

Stainless Steel Plumbing

Stainless Steel valves and fittings

Skid mounted

Visual Indication gauges

Control panel with Color Touch Screen

Completely wired, piped, and tested

Dimensions:

6ft W X 10ft L X 9ft H

Weight:

Approximately 2000 Lbs. (empty).

Capacity:

1,135 gallons of oil

Construction:

All materials used in the construction of this system will be 304 Stainless Steel.

Piping:

Stainless Steel

Electrical:

220V/3PH/50Hz (ATEX)

Controls:

Automatic mode controlled by PLC and color touch screen;   Start button initiates semi-automated process; Manual glycerin and fuel transfer modes require Human action.

Reaction Method:

Base Transesterification

Wash Method:

Dry Wash using Purolite PD206.  No Water used!

Batch Time:

Heating of material and Methoxide mixing 1.5 hr

Reaction Time - 1.5 hrs

Settling Time - 2 hrs

Dry Wash- 1 hr

Methanol Recovery 1hr

We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)

Total Process Time:

Approx. 8 hours start to finish.

Price:  CONTACT US!

BEE Precision 600

This system includes a Methoxide Mixer, Reactor, Ion Exchange Dry Wash and a proven Methanol Recovery system engineered by some of the top professionals in the industry.  ALL tanks, pumps, piping, valves are made from 304 Stainless Steel to ensure no corrosion!

This system will be capable of making finished biodiesel in 10 hours. So within a normal workday you will be able to produce 2,270 Litres of finished biodiesel! It can also produce 400 litres every hour!!

BEI Precision 600 Package

600 micron pre filter

Sodium Methylate electric feed diaphragm pump with explosion proof motor

Methanol feed/circulation centrifugal pump with explosion proof motor 40 L PM

Stainless steel 300 Litre Sodium Methylate/Methanol mix tank

Feedstock feed/circulation centrifugal pump with explosion proof motor 60 L PM

24 kW feedstock electric heater

Two (2) Stainless Steel Reactor Vessel 1,540 Litres

Ion Tower feed/transfer pump 25 L PM

Two (2) Stainless Steel Ion Exchange Resin Tower

Stainless Steel Methanol Recovery Batch Flash Evaporator 1,820 Litres

24 kW Electric Heater

Centrifugal circulation/transfer pump with explosion proof motor 150 L PM

Air Compressor

Air Fin Condenser

Air Ejector to produce vacuum

Stainless Steel Methanol Recovery Tank 150 Litres

Stainless Steel Plumbing

Stainless Steel valves and fittings

Skid mounted

Visual Indication gauges

Control panel with Color Touch Screen

Completely wired, piped, and tested

Dimensions:

6ft W X 10ft L X 9ft H

Weight:

Approximately 2000 Lbs. (empty).

Capacity:

2,270 Litres of oil

Construction:

All materials used in the construction of this system will be 304 Stainless Steel.

Piping:

Stainless Steel

Electrical:

220V/3PH/50Hz (ATEX)

Controls:

Automatic mode controlled by PLC and color touch screen;   Start button initiates semi-automated process; Manual glycerin and fuel transfer modes require Human action.

Reaction Method:

Base Transesterification

Wash Method:

Dry Wash using Purolite PD206. No Water used!

Batch Time:

Heating of material and Methoxide mixing 1.5 hr

Reaction Time - 1.5 hrs

Settling Time - 4 hrs (2hrs for each vessel)

Dry Wash- 1 hr

Methanol Recovery 1hr

We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)

Total Process Time:

Approx. 10 hours start to finish. (Time Varies depending upon process, see time frames below)

Price:  Contact Us

BEI Precision 600 AcidEsterification

Dimensions:

4ft W X 4ft L X 9ft H

Weight:

Approximately 1000 Lbs. (empty).

Capacity:

2,270 Litres of oil

Construction:

All materials used in the construction of this system will be 304 Stainless Steel.

Piping:

Stainless Steel

Electrical:

220V/3PH/50Hz (ATEX)

Controls:

Automatic mode controlled by PLC and color touch screen

Reaction Method:

Acid Esterification

Separation Method:

Settling

Batch Time:

Heating of material and Methanol/Acid mixing 1.5 hr

Reaction Time - 1 hr

Settling Time - 1 hr

We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)

Total Process Time:**

Approx. 4 hours start to finish

B-500 Continuous

Sonic B-500 Continuous Batch Commerical Production System $50,000.00 - Includes Shipping

Our B-500 processor is the heart of the Continuous Batch system and has

the capacity to produce 2.3 million gallons of Biodiesel annually.

The B-500 Continuous Batch Biodiesel Plant produces 400 gallon batches of Biodiesel.

Down Load B-500/CB Info Doc Here

B-500 continuous batch processor includes all steel plumbing, mixing pump, and heavy duty brass ball valves. Methoxide mixing tank is plumbed with the explosion proof pump for safety and ease of use.

The AUTOBIO automation system is now remote controlled via IP address. Biodiesel plant managers can monitor and manipulate all aspects of their Biodiesel operation offsite with a computer and an Internet connection.

The AUTOBIO automation system features the Mitsubishi Human Machine Interface and may be used with any manufacturer's Biodiesel system. Each Biodiesel plant would have to be evaluated for an estimate.

NEW....!

The AUTOBIO automation system uses the Mitsubishi FX Programmable Logic Controller for outstanding quality and reliability.

NEW....!

With over 9 million PLCs sold worldwide makes the FX series the controller of choice.

The retail price of the AUTOBIO automation system is $135,000

B-500 Continuous Batch System $49,999.00 - Includes FREE Shipping

Continuous Batch Tank (Extra)

ORDER TODAY!

B-500 Continuous Batch System

$49,999.00 (FREE SHIPPING)

B-500 Manual

B-500 system has the capacity to produce 400 gallon batches every five hours!

B-500 Commercial Production System $10,000.00 - Includes Shipping

The B-500 Biodiesel processor includes all steel plumbing, mixing pump, and heavy duty brass ball valves. Methoxide mixing tank is plumbed with the explosion proof pump for safety and ease of use.

500 Gallon High Density Polyethylene Reactor Module
110 Gallon High Density Polyethylene Methoxide Module
112 Gallon Per Minute Heavy-Duty Biodiesel Explosion-Proof Mixing Pump
Stainless Steel Temperature Gauge
External Heat Exchanger
Methanol Recovery Module
Dry Wash System Available!

Continuous Batch Tank (Extra)

ORDER TODAY!

B-500 Continuous Batch System

$10,000.00 (FREE SHIPPING)

CONTACT US FOR ORDERING INFORMATION

ORDER TODAY!
email or call for ordering details

You may finance the B-500 system

Location: Factory of Business Tampa

Price Terms: USD 10,000.00

Terms of Payment: Bank Wire

Supply Ability: 1 Set/Sets per Day

Minimum Order: 1 Set/Sets

Packaging: Pallet

Delivery Lead Time: 60 Days

SHIPPED FREE - ANYWHERE IN CONTINENTAL U.S.A.

Dimensions:	4ft W X 6ft L X 8ft H
Weight:	Approximately 900 Lbs. (empty).
Capacity:	380 Litres of oil
Construction:	All materials used in the construction of this system will be 304 Stainless Steel.
Piping:	Stainless Steel
Electrical:	220V/3PH/50Hz (ATEX)
Controls:	Automatic mode controlled by PLC and color touch screen; Start button initiates automated process; Manual glycerin and fuel transfer modes require Human action.
Reaction Method:	Base Transesterification
Wash Method:	Dry Wash using Purolite PD206. No Water Wash!
Batch Time:	Heating of material and Methoxide mixing 1.5 hr Reaction Time - 1.5 hrs Settling Time - 2 hrs Dry Wash- 1 hr Methanol Recovery 1hr We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)
Total Process Time:	Approx. 8 hours start to finish.

Dimensions:	4ft W X 6ft L X 8ft H
Weight:	Approximately 450kg. (empty).
Capacity:	760 Litres of oil
Construction:	All materials used in the construction of this system will be 304 Stainless Steel.
Piping:	Stainless Steel
Electrical:	220V/3PH/50Hz (ATEX)
Controls:	Automatic mode controlled by PLC and color touch screen; Start button initiates automated process; Manual glycerin and fuel transfer modes require Human action.
Reaction Method:	Base Transesterification
Wash Method:	Dry Wash using Purolite PD206. No Water Wash!
Batch Time:	Heating of material and Methoxide mixing 1.5 hr Reaction Time - 1.5 hrs Settling Time . 4 hrs (2 hrs each) Dry Wash- 1 hr Methanol Recovery 1hr We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)
Total Process Time:	Approx. 10 hours start to finish.

Dimensions:	6ft W X 10ft L X 9ft H
Weight:	Approximately 2000 Lbs. (empty).
Capacity:	1,135 gallons of oil
Construction:	All materials used in the construction of this system will be 304 Stainless Steel.
Piping:	Stainless Steel
Electrical:	220V/3PH/50Hz (ATEX)
Controls:	Automatic mode controlled by PLC and color touch screen; Start button initiates semi-automated process; Manual glycerin and fuel transfer modes require Human action.
Reaction Method:	Base Transesterification
Wash Method:	Dry Wash using Purolite PD206. No Water used!
Batch Time:	Heating of material and Methoxide mixing 1.5 hr Reaction Time - 1.5 hrs Settling Time - 2 hrs Dry Wash- 1 hr Methanol Recovery 1hr We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)
Total Process Time:	Approx. 8 hours start to finish.

Dimensions:	6ft W X 10ft L X 9ft H
Weight:	Approximately 2000 Lbs. (empty).
Capacity:	2,270 Litres of oil
Construction:	All materials used in the construction of this system will be 304 Stainless Steel.
Piping:	Stainless Steel
Electrical:	220V/3PH/50Hz (ATEX)
Controls:	Automatic mode controlled by PLC and color touch screen; Start button initiates semi-automated process; Manual glycerin and fuel transfer modes require Human action.
Reaction Method:	Base Transesterification
Wash Method:	Dry Wash using Purolite PD206. No Water used!
Batch Time:	Heating of material and Methoxide mixing 1.5 hr Reaction Time - 1.5 hrs Settling Time - 4 hrs (2hrs for each vessel) Dry Wash- 1 hr Methanol Recovery 1hr We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)
Total Process Time:	Approx. 10 hours start to finish. (Time Varies depending upon process, see time frames below)

Dimensions:	4ft W X 4ft L X 9ft H
Weight:	Approximately 1000 Lbs. (empty).
Capacity:	2,270 Litres of oil
Construction:	All materials used in the construction of this system will be 304 Stainless Steel.
Piping:	Stainless Steel
Electrical:	220V/3PH/50Hz (ATEX)
Controls:	Automatic mode controlled by PLC and color touch screen
Reaction Method:	Acid Esterification
Separation Method:	Settling
Batch Time:	Heating of material and Methanol/Acid mixing 1.5 hr Reaction Time - 1 hr Settling Time - 1 hr We allow 1 Hour for normal operations (titrations, transfer of material in and out, etc)
Total Process Time:	Approx. 4 hours start to finish